1. … grinding with diamond tools is possible.Dur R (Ni) is available as a 500 mm flexible rod or endless on coils. … Dur R (Ni) can be applied on …
  2. … Thicker sections than 5 mm should be preheated up to approximately 500 °C. … Cladding steel, Grey cast iron, Copper, Copper Alloys and …
  3. … 316/316H austenitic stainless steels operating at high temperatures (500-800°C) under long term creep conditions. This filler metal can also …
  4. … The weld metal is not age hardenable and when used to join Monel K-500 it has lower strength then the base metal. … 2.4360, 2.4375, NiCu30Fe, NiCu30Al, Monel alloy 400, R405, alloy K500 and dissimilar welding between these alloys. … NiCu30Mn Tig … A …
  5. … metal provides optimum strength and oxidation resistance above 816°C (1500°) up to 1149°F (2100°F), especially when welding on base metals of …
  6. … risk of chipping of. The weld deposit is temperature resistant up to 500°C and hardness will remain very well at increased temperatures. …
  7. … easy slag removal. Suitable for economic welding of Mo-steels up to 500°C (932°F). … Typ 0,5Mo  ≤ 460 MPa,  ISO 15608: 1.2, 1.3 1.5415, …
  8. … The weld metal is not age hardenable and when used to join Monel K-500 it has lower strength then the base metal.  … 2.4360, 2.4375, NiCu30Fe, NiCu30Al, Monel 400, R405, Alloy K500 and dissimilar welding between these Alloys. … E NiCu30Mn … A 5.11: …
  9. … May find its use for joining creep resistance steels up to about 500ºC but the CEWELD SG MO wire would be the more usual choice … … 18MnMo4-5, 20MnMoNi4-5, P275NH, P355NH, P460NH, P355QH, P460QH, P500QH, GS-17CrMo55, GS-22CrMo5, GS-22CrMoV32, GS-CrMo54, 15CrMo3, 13CrMoV42, S550QL1, OPTIM 500ML, PAS 65 us, PAS 70 us, Dilimax 500, Dilimax 550, AISI 4130, 4140, …
  10. … mechanical properties with yield strength exceeding 500 MPa in sweet and salt water makes AquaForce MG the preferred choice …